Selection Of Tools For CNC Lathes

Selection Of Tools For Cnc Lathes

The most commonly used tool for contour milling is the end mill. The following mainly describes the selection of the size of the milling cutter and the number of teeth.

(1) Dimensions of end mills

In contour milling, the factors that need to be considered for the end mill include: the diameter of the end mill, the length of the end mill, and the length of the spiral groove.
The diameter of the end mill is used first. Because the tool with a large diameter has high bending strength, it is not easy to cause bending and vibration during processing, but pay attention to the tool radius of the end mill must be smaller than the minimum radius of curvature of the part contour, generally Take 0.8~0.9 times of the minimum curvature radius. In addition, the protruding length of the tool should be as short as possible. The longer the length of the end mill, the lower the bending strength and the greater the degree of bending under force, which will affect the quality of processing, and is prone to vibration and wear of the cutting edge.
Regardless of the overall tool length, the helical flute length determines the maximum depth of cut. In practical applications, the cutting attempt in the z direction generally does not exceed the radius of the tool; for end mills with a smaller diameter, 1/3 of the diameter of the tool is generally selected as the cutting depth.

(2) also the number of teeth

Small or medium diameter milling cutters, usually with 2 or 3 co-located teeth (or more). The type of workpiece material to be machined and the nature of the machining are often the determining factors in selecting the number of teeth.
In the processing of workpiece materials with high plasticity, such as aluminum and magnesium, in order to avoid the generation of built-up edge, end mills with few teeth are commonly used, such as two-tooth (C spiral groove) production milling cutters. End mills have fewer teeth to avoid built-up edge when the cut is larger because of the larger chip space between the helical flutes.
The opposite is true for harder materials, as he needs to consider two other factors – tool chatter and tool offset. When machining brittle materials, choosing a multi-tooth end mill will reduce tool chatter and deflection, as more teeth provide a smoother cut.
For small or medium diameter end mills, three-tooth end mills have the advantages of two-tooth and four-tooth tools, and have good processing performance. Keyway milling cutters usually have two helical grooves, which are similar to drills and are cut vertically into solid material.


At,we use advanced equipment to offer you Unparalleled precision for producing metal and plastic machining parts

  • We combine the latest CNC milling and turning processes with proprietary technology to deliver high quality, on-demand parts.
  • Our team of engineers and machinists program the equipment to optimize cutting time, surface finish, and final tolerance to meet your design specifications
  • We specialize in cnc precision machining, single part prototyping, short to medium production runs, manufacture parts on time, every time, so you can stay ahead of schedule
  • CNC machining can create very similar parts to series parts. It is often more efficient and faster than other rapid prototyping technologies for the manufacture of a quantity of prototypes between 1 and 10 parts . We also recommend CNC machining for parts with large sizes (greater than 600 mm).

Apple agrees to pay U.S. users up to $500 million for slowing down older iPhones

(Original title: Apple agrees to pay up to $500M to settle a US class-action lawsuit accusing it of quietly slowing down older iPhones)

Netease Technology News March 3 news, according to foreign media reports, Apple has agreed to pay $ 500 million to settle its so-called “speed gate” class action lawsuit. In the case, Apple is accused of quietly slowing down older iPhones when releasing new models to lure users into buying new phones or replacing batteries.

A preliminary proposed class-action settlement will be disclosed late Friday night and requires approval from District Judge Edward Davila in San Jose, Calif. Under the settlement, Apple will pay $25 to consumers who buy older iPhones, an amount that may vary based on the number of eligible iPhones, with a minimum payout of about $310 million and a maximum of $500 million. Apple denies wrongdoing, court documents show.

Apple’s settlement covers U.S. users of the iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, and iPhone SE running iOS 10.2.1 or later. It also includes US users such as the iPhone 7 and iPhone 7 Plus running iOS 11.2 or later before December 21, 2017.

Consumers involved in the class-action lawsuit believe their phone’s performance suffered after installing an Apple software update. They say Apple’s publicity misled them into believing that their phones were nearing the end of their life cycle and needed a new phone or battery replacement. Apple largely attributed the issues to temperature changes, high usage and other issues, and said its engineers quickly resolved them.

Lawyers representing consumers said the settlement was “fair, reasonable and appropriate.” They called the $25 per iPhone “considerable by any measure,” after damages experts suggested that $46 per iPhone might be the maximum.

Lawyers plan to seek up to $93 million in attorney’s fees, or 30 percent of the $310 million, plus up to $1.5 million in other fees. After an initial outcry from consumers about slowing down the iPhone, Apple apologized and lowered the price of a replacement battery from $79 to $29. (small)

The Links:   M170EG01 V2 LT084AC37400