Cooling in the series, dubbed ASB75, can deliver up to 75W and are baseplate cooled – across a baseplate range of -40 to +85°C. Conversion to convection or forced-air cooling, with de-rating above 50°C, is through an optional heatsink for the cold-wall which increases height from 17 to 54mm.
Input is universal (90 – 264Vac, with slight de-rating below 100V), and ac fuse, EMC filter and hold-up capacitor are internal.
There are five models, all single output: 12, 15, 24, 36 or 48V. Adding a single Resistor allows ±10% trimming.
Efficiency is up to 88 – 90% depending on version, and no load draw is <150mW.
Size is 58 x 61 x 17mm and the unit mounts via its five through-hole solder pins – the cooling ‘baseplate’ is the top surface.
The in-built filtering will meet EN55032 Level B for conducted and radiated emissions as well as EN61000-4 immunity. Safety compliance is to UL/EN/IEC62368-1.
Protections include over-temperature, over-current, over-voltage and output short-Circuit.
Applications are foreseen in IT equipment, IoT and industry – there is a 3-year warranty.
They are available direct from XP, or via Digi-Key, Farnell, Mouser, RS Components and regional distributors.