“What if your grandfather could manage his diabetes without using cumbersome test papers and confusing information? What if a 7-year-old child with diabetes does not have to face the tension or fear every time he pierces his finger? These are the obstacles that the current continuous blood glucose monitoring (CGM) technology has overcome, and they are also the problems that ADI has solved by...
1. For general taps for processing non-standard parts of hardware parts, a half-diameter electrode is used to remove the broken taps. The large tap, the broken screw is processed with a hexagonal electrode, and then a hexagonal wrench is used to take it out. Other broken tools and knives are processed with electrodes of suitable shape and size.
2. Non-standard parts processing sequence: Put a metal plate in the plastic container-fix the processed part and the processing head-(the magnetic base should not be placed in water)-install the brass electrode into the chuck and fasten it, The electrode diameter is half of the nominal diameter of the tap-connect the cable, connect the wire clamp to the processed part-find the position of the positive electrode and the tap, the distance is 1-2 mm, adjust the stroke indication position-into the container Add working fluid, at least 10 mm above the surface of the part-turn on the main power switch-select the processing current-press the start button to start processing-automatically stop processing at the end of processing (reach the set depth), and manually operate the electrode to rise.
1. The damage and protective measures of non-standard parts processing chips in the processing of hardware parts. The toughness of various steel parts processed on the lathe is better, the chips produced during turning are full of plastic curl, and the edges are relatively sharp. During high-speed cutting of steel parts, red hot and long chips are formed, which are very easy to hurt people. At the same time, they are often wound on the workpiece, turning tools and tool holders. Therefore, iron hooks should be used to clean up or break them in time during work. It should be stopped to remove it when it is time, but it is never allowed to remove or pull it off by hand.
In order to prevent chip damage, hardware parts processing often adopts chip breaking, control chip flow measures and various protective baffles. The chip breaking measure is to grind chip breakers or steps on the turning tool; use a suitable chip breaker and mechanically clamp the tool.