According to the precision CNC machining company, machining is a process in which machining machinery is used to change the shape or performance of the workpiece. According to the temperature state of the workpiece to be processed, it is divided into cold processing and hot processing. Generally processing at room temperature, and does not cause chemical or phase changes of the workpiece, it is...
CNC turning and milling combined processing is a relatively common operation process now, but it is normal for some problems to occur in the process of CNC milling. The key is to deal with these problems in a timely manner. Datang Machinery will do it for you. Introduce the common faults of CNC milling:
1. Output problem: The main reasons for this problem are the following three aspects: whether the computer and the control box are connected properly; whether the signal wire is loose and whether the line is connected; whether the manager space is slow, delete the unused files in the manager !
2. Non-alarm failure: The repeated machining accuracy of CNC turning-milling compound processing is not enough, it is very likely that there is a problem with the line link; the computer is running, the machine does not move, whether the control card and the electrical box connection are loose; the machine is looking for it when returning to the machine origin If there is no signal, it is possible that the proximity switch at the mechanical origin is malfunctioning!
3. Alarm failure: Whether the CNC turning and milling compound processing machine and the computer are properly grounded; whether the graphic size exceeds the processing range; check whether the front coordinate value exceeds the soft limit value range; whether the machine motor shaft and the lead screw connection line are loose